La Marzocco Linea PB Operating Manual Download Page 41

Page: 41 / 64

Display

Operating Procedure

Description

Programming Mode

Coffee Boiler

Settings

Coffee Boiler

“Technical” Programming

After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until

the following screen is displayed.

Press the T3 button to enter the menu.

Press the T3 button to enter the menu, move between the parameters using the buttons T1 and T2

to select

ENABLED

DISABLED

, press the T3 button to confirm the option. In the case of espresso machine

with 4 groups you can set this option also on the coffee boiler 2.

Press the T3 button to enter the menu, move with the buttons T1 and T2 to set the desired

temperature, press the T3 button to confirm the value. In the case of espresso machine with 4 groups you can

set the temperature also on the coffee boiler 2. The temperature indicated on the left is the actual temperature of the

group while the temperature on the right is the set temperature.

2
3

Coffee Boiler

Settings

Coffee Boiler 1

ENABLED

Enter Password

******

CB1 Temperature

93.1

C 93.3

THE STEAM BOILER CONTAINS WATER AT ELEVATED TEMPERATURES. WATER

TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH

FROM SCALDING.

DANGER

• This parameter enables the technician to

set various parameters of the coffee boiler.

• The temperature of the boiler is measured

at the most critical point in the boiler where

temperature fluctuation is the greatest.

• The temperature of the water exiting the

group head is held constant by means of the

mass of the group casting. Even though the

temperature of the boiler may vary slightly,

the temperature of the water exiting the

group is constant.

• To properly calibrate the temperature of any

espresso machine it is import to measure

the temperature of the water exiting the

group by means of an external temperature

measuring device. The difference of the

display temperature and the measured

temperature may be compensated by use

of the “Coffee T. Offset” parameter.

Summary of Contents for Linea PB

































































Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands

La Marzocco Linea PB, Operating Manual

Search results

Summary of Contents for Linea PB

Reviews:

Related manuals for Linea PB

Brands by name

Popular brands