EN
44
Display
Operating Procedure
Description
Programming Mode
Press T1
or T2
to continue with the programming of the other parameters.
To exit the menu move between the parameters using the buttons T1
and T2
until the exit menu is displayed.
Press the T3 button
to exit the menu.
Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine by pressing
T2
and T3
at the same time.
Steam Boiler
“Technical” Programming
Exit
Menu
11
LaMarzocco 00:00
CB 93.8
°
C SB
12
Steam Boiler
Settings
• The parameter filling WITH PUMP allows
the technician to select the activation of
the water pump during the automatic
filling cycle of the service boiler.
• Only under unusual circumstances would
the option of “WITHOUT PUMP” be
chosen.
• The electronics installed in this espresso
machine give priority to the brew boiler for
pressure. The activation of the auto-fill cy-
cle during the brewing process can reduce
the overall dispensing pressure in the brew
boiler.
• During the auto-fill cycle, if a brew cycle is
chosen, the auto-fill cycle is delayed until
all brew cycles are complete.
THE STEAM BOILER CONTAINS WATER AT ELEVATED TEMPERATURES. WATER
TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS INSTANTLY OR DEATH
FROM SCALDING.
DANGER
13
Summary of Contents for Linea PB
Page 1: ...EN L I N E A P B ...
Page 63: ......
Page 64: ...printed on environmentally friendly Munken paper ...
