EN
47
Display
Operating Procedure
Description
Programming Mode
After accessing the “Technical” programming menu and entering the password, use the buttons T1 and T2 until
the following screen is displayed.
Pressing the T3 button the first value will blink. Use the buttons T1 and T2 to set the clock. Repeat
the operation to set the day of the week.
Press T1 or T2 to continue with the programming of the other parameters.
To exit the menu move between the parameters using the buttons T1 and T2 until the exit menu is displayed.
Press the T3 button to exit the menu.
Alternatively, you can exit the “Technical” programming and return to the normal use of the espresso machine by
pressing T2 and T3 at the same time.
• This parameter allows the user to set the
time of day and the day of the week.
• This parameter is used to display time and is
also used by the “Auto On/Off” parameter
• There are 4 changeable values within this
parameter:
•
Hour;
•
Minute;
•
Day of week;
•
Hour Format 12h or 24h.
2
Clock Time
00:00 MONDAY
Clock Adjust
Clock Time
00:00 MONDAY
3
“Technical” Programming
1
Enter Password
******
Exit
Menu
LaMarzocco 00:00
CB 93.8
°
C SB
4
5
Summary of Contents for Linea PB
Page 1: ...EN L I N E A P B ...
Page 63: ......
Page 64: ...printed on environmentally friendly Munken paper ...
