Kyocera ECOSYS FS-1035MFP/DP Operation Manual Download Page 147

Page: 147 / 442

5-9

Sending Functions

File Format

Select the file format of the image to send.

The table below lists the file formats and their details.

Use the procedure below to select the file format for transmission.

Press the

Send

key.

Place the original.

Press the

Function Menu

key. Function Menu appears.

Press the

key to select [File Format].

Press the

key. File Format appears.

Press the

key to select the file format from [PDF],

[TIFF], [XPS] or [JPEG].

If Full Color or Grayscale has been selected for the color
mode for scanning, press [Detail] (the

Right Select

key)

and select the image quality.

Press the

key.

Completed.

is displayed and the screen returns to the

basic screen for sending.

Specify the destination, and press the

Start

key to start

sending.

NOTE:

Press the

Reset

key to reset the settings selected in

Function Menu.

File Format

Adjustable range of image

quality

Color mode

PDF

1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)

Full Color, Grayscale, Black
and White

TIFF

1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)

Full Color, Grayscale, Black
and White

XPS

1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)

Full Color, Grayscale

JPEG

1 Low Quality (High Comp.) to
5 High Quality (Low Comp.)

Full Color, Grayscale

Function Menu:

*********************

Original Size

Original Image

[ Exit

]

Color Selection

File Format:

*********************

TIFF

XPS

[ Detail ]

*PDF

Summary of Contents for ECOSYS FS-1035MFP/DP



























































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands

Kyocera ECOSYS FS-1035MFP/DP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands