Kyocera ECOSYS FS-1035MFP/DP Operation Manual Download Page 109

Page: 109 / 442

3-19

Basic Operation

Send as E-mail

Sends a scanned original image as an E-mail attachment.

NOTE:

• You must have a network environment in which this machine can connect to a mail server. It is recommended

that the machine be used in an environment in which it can connect to the mail server at any time over a LAN.

• Access the COMMAND CENTER beforehand and specify the settings required for sending e-mail. For details,

see

COMMAND CENTER (Settings for E-mail) on page 2-26

• Refer to

Character Entry Method on Appendix-5

for details on entering characters.

Press the

Send

key.

Displays the screen for sending.

Place the originals on the platen or in the document
processor.

NOTE:

For loading instructions, refer to

Loading

Originals on page 2-52

Press the

key to select [E-mail].

Press the

key. Address Entry appears.

Enter the destination e-mail address.

NOTE:

Destination can be specified using the Address

Book or the One-touch keys. Refer to

Specifying

Destination on page 3-25

Send to:

*********************

Folder(SMB)

Folder(FTP)

E-mail

Address Entry:

ABC

[ Text

]

Summary of Contents for ECOSYS FS-1035MFP/DP



























































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands

Kyocera ECOSYS FS-1035MFP/DP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands