Kyocera ECOSYS FS-1035MFP/DP Operation Manual Download Page 154

Page: 154 / 442

5-16

Sending Functions

Subject and Body Entry

When sending E-mail, enter the subject and body of the E-mail.

Use the procedure below to enter the subject and body for an E-mail message and then send the E-mail.

NOTE:

Refer to

Character Entry Method on Appendix-5

for details on entering characters.

Press the

Send

key.

Place the original.

Press the

Function Menu

key. Function Menu appears.

Press the

key to select [Subject/Body].

Press the

key. Subject Entry appears.

Enter the subject and press the

key.

NOTE:

Up to 60 characters can be entered for the subject.

Enter the body and press the

key.

NOTE:

Up to 500 characters can be entered for the body.

Completed.

is displayed and the screen returns to the

basic screen for sending.

Specify the destination, and press the

Start

key to start

sending.

NOTE:

Press the

Reset

key to reset the settings selected in

Function Menu.

Function Menu:

*********************

Original Size

Original Image

[ Exit

]

Color Selection

Subject Entry:

ABC

[ Text

]

Body Entry:

ABC

[ Text

]

Summary of Contents for ECOSYS FS-1035MFP/DP



























































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Brands by name

Popular brands

Kyocera ECOSYS FS-1035MFP/DP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Brands by name

Popular brands