Kyocera ECOSYS FS-1035MFP/DP Operation Manual Download Page 378

Page: 378 / 442

11-10

Management

Press the

key. Local User List appears.

The procedure differs depending on the details to be
edited.

Changing user information

Press the

key to select the user whose

information you want to change, and then press the

key.

In the same fashion as registering a new user, press the

key to select the desired item, press [Edit] (the

Right Select

key), change information, and then press

the

key.

Repeat step 2 to change items as necessary.

After completing changing the user information, press
the

key again.

The overwrite confirmation screen appears.

Press [Yes] (the

Left Select

key). The user information

is changed and the screen returns to Local User List.

Deleting a user

Press the

key to select the user you want to

delete, and then press [Menu] (the

Right Select

key).

Press the

key to select [Delete] and then press

the

key.

Local User List:

*********************

Admin

User1

[ Menu

]

DeviceAdmin

Local User List:

DeviceAdmin

*********************

User1

[ Menu

]

Admin

Detail:

User Name:

1/6

User1

[ Edit

]

Local User List:

DeviceAdmin

*********************

User1

[ Menu

]

Admin

Menu:

Detail/Edit

*********************

Add User

Delete

Summary of Contents for ECOSYS FS-1035MFP/DP



























































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands

Kyocera ECOSYS FS-1035MFP/DP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands