Kyocera ECOSYS FS-1035MFP/DP, Operation Manual

Page: 295 / 442

8
8-101
Default Setting (System Menu)
4
Press the OK key. Correct. Bk Line appears.
5
Press the
U
or
V
key to select [Off], [On(Low)] or
[On(High)].
6
Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
New Developer
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
1
In the Sys. Menu/Count. menu, press the U or V key to
select [Adjust/Maint.].
2
Press the OK key. The Adjust/Maint. menu appears.
3
Press the U or V key to select [Service Setting].
4
Press the OK key. The Service Setting menu appears.
5
Press the U or V key to select [New Developer].
6
Press the OK key. A confirmation screen appears.
7
Press [Yes] (the Left Select key). Completed. is
displayed and the screen returns to the Service Setting
menu.
Correct. Bk Line:
a b
*********************
2
On(Low)
3
On(High)
1
*Off
Sys. Menu/Count.:
a b
:
Document Box
;
Edit Destination
*********************
[ Exit ]
< Adjust/Maint.
Adjust/Maint.:
a b
*********************
2 Send/Box Density
3 Correct. Bk Line
[ Exit ]
1 Copy Denst. Adj.
Service Setting:
a b
*********************
2 Network Status
3 New Developer
[ Exit ]
1 Service Status
New Developer.
Are you sure?
[ Yes ] [ No ]