Kyocera ECOSYS FS-1035MFP/DP Operation Manual Download Page 193

Page: 193 / 442

7-19

Status / Job Cancel

Device/Communication

Configure the devices/lines installed or connected to this machine or check their status. You can also control devices
depending on their status.

Check of Device Status

Press the

Status

Job Cancel

key. The Status menu

appears.

Press the

key to select [Scanner], [Printer] or

[FAX].

Press the

key. This displays the status of the device

selected in step 2.

Press the

key. The screen returns to the Status

menu.

The items you can check are described below.

Scanner

The information (scanning, pausing, etc.) is displayed.

Printer

Information (waiting, printing, etc.) is displayed.

FAX

The information (sending, waiting, etc.) is displayed.

Status:

Store Job Log

*********************

Printer

[ Pause

]

Scanner

Scanner:

Ready.

Printer:

Processing.

FAX:

Ready.

[

Log

]

Summary of Contents for ECOSYS FS-1035MFP/DP



























































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Brands by name

Popular brands

Kyocera ECOSYS FS-1035MFP/DP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Brands by name

Popular brands