Kyocera ECOSYS FS-1035MFP/DP Operation Manual Download Page 223

Page: 223 / 442

8-29

Default Setting (System Menu)

The Date Settings menu appears.

Press the

key to select [Date/Time].

Press the

key. The screen to enter the date of Date/

Time appears.

Set the date.

Press the

key to move to the item (Year / Month

/ Day) you want to enter.

Press the

key to set each item.

Press the

key. The screen to enter the time of Date/

Time appears.

Set the time.

Press the

key to move to the item (Hour / Min. /

Second) you want to enter.

Press the

key to set each item.

Press the

key.

Completed.

is displayed and the

screen returns to the Date Settings menu.

NOTE:

If you try to change the date/time when a trial

application (

page 8-149

) is running, the

If you change Date/

Time setting, trial functions will be unavailable. Are you
sure?

message is displayed. To change the date/time, press

[Yes](the

Left Select

key).

Date Setting:

*********************

Date Format

Time Zone

[ Exit

]

Date/Time

Date/Time:

Year Month Day

*2011*

01 01

(Time Zone:Greenwich)

Date/Time:

Hour Min. Second

****11

: 45: 50

(Time Zone:Greenwich)

Summary of Contents for ECOSYS FS-1035MFP/DP



























































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Brands by name

Popular brands

Kyocera ECOSYS FS-1035MFP/DP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Brands by name

Popular brands