Kyocera ECOSYS FS-1035MFP/DP Operation Manual Download Page 167

Page: 167 / 442

6-5

Document Box

Saving Documents to USB Memory (Scan to USB)

This function allows you to store scanned image files in USB memory connected to the machine. You can store files
in PDF, TIFF, JPEG or XPS format.

NOTE:

The maximum number of the storable files is 100.

Storing Documents

The procedure for storing documents in removable USB memory is explained below.

Plug the USB memory into the USB memory slot .

Press the

Document Box

key. The Document Box menu

appears.

Press the

key to select [USB Memory].

Press the

key. USB Memory appears.

Select the destination of the scanned image files.

To save the data directly to the USB memory, go to step 6.

To save the data in the folder of USB memory, press the

key to select the folder, and then press the

key. The machine will display documents in the top 3
folder levels, including the root folder.

Press the

key to select [Store File], and then

press the

key. The basic screen appears. Press the

Function Menu

key to change the original type, file

format, etc., as necessary. For changing scan settings,
refer to

Sending Functions on page 5-1

Document Box:

Sub Address Box

Polling Box

*********************

USB Memory

USB Memory:

*********************

Folder-1

File-1

[ Menu

] [ Select ]

Store File

Ready to scan.

1-Sided 300x300dpi
[ Duplex ] [ScanRes.]

Summary of Contents for ECOSYS FS-1035MFP/DP



























































































































































































































































































































































































































































Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands

Kyocera ECOSYS FS-1035MFP/DP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1035MFP/DP

Reviews:

Related manuals for ECOSYS FS-1035MFP/DP

Brands by name

Popular brands