Kyocera DF-420 Service Manual Download Page 249

Page: 249 / 296

3MZ

1-3-22

U614

Adjusting the DTMF output level
Description

Adjusts the DTMF output level of a push-button dial telephone.

Purpose

No change is necessary from the factory default.

Start

1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
3. Press the start key.

The screen for the selected item appears.

Setting

1. Change the setting using the numeric keys.

2. Press the start key. The value is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Description

SGL LV DTMF(H)

Adjusts the DTMF (high-frequency group) output level.

SGL LV DTMF(L)

Adjusts the DTMF (low-frequency group) output level.

Setting

DTMF (high-/low-frequency group) output level

2.0 dBm

1.5 dBm

1.0 dBm

0.5 dBm

0 dBm

-0.5 dBm

-1.0 dBm

-1.5 dBm

-2.0 dBm

Summary of Contents for DF-420









































































































































































































































































































Search results

Summary of Contents for DF-420

Reviews:

Related manuals for DF-420

Brands by name

Popular brands

Kyocera DF-420, Service Manual

Search results

Summary of Contents for DF-420

Reviews:

Related manuals for DF-420

Brands by name

Popular brands