Kyocera DF-420, Service Manual

Page: 254 / 296

3MZ
1-3-27
U650
(cont.)
Setting the number of lines to be ignored when receiving a fax (A4R, letter) in the auto reduction mode
Sets the maximum number of lines to be ignored if the received data volume exceeds the recording capacity
when the data is recorded in the auto reduction mode onto A4R or letter-size paper under the conditions
below.
If the number of excess lines is below the setting, those lines are ignored. If over the setting, the entire data on
a page is further reduced so that it can be recorded on the same page.
With A4R present and folio absent in the drawers
With letter-size paper present and legal-size paper absent in the drawers
1. Change the setting using the numeric keys.
Increase the setting if a page received in the reduction mode is over-reduced and too much trailing edge
margin is left. Decrease it if the received image does not include all transmitted data.
2. Press the start key. The value is set.
Setting the recording width for inch specifications
Sets the maximum recording width and processing method when 11" width fax paper is loaded on an inch
specification machine.
1. Enter 1 or 2 using the numeric keys to change the setting.
2. Press the start key. The value is set.
Setting the automatic printing of the protocol list
Sets if the protocol list is automatically printed out.
1. Change the setting using the numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Description Setting range Default setting Change in value
per step
Number of lines to be ignored when receiv-
ing a fax (A4R, letter) in the auto reduction
mode 0 to 22 0 16 lines
Display Description
1: 11 x 17 Communicates to the destination unit 11" width as A3 width and
records at 100% magnifications.
2: B4 Communicates to the destination unit 11" width as B4 width.
Display Description
1: OFF The protocol list is not printed out automatically.
2: ERROR The protocol list is automatically printed out after communication only
if a communication error occurs.
3: ON The protocol list is automatically printed out after communication.