Kyocera DF-420 Service Manual Download Page 248

Page: 248 / 296

3MZ

1-3-21

U613

Setting the DTMF output level
Description

Sets the DTMF output level of a push-button dial telephone.

Purpose

Used if problems occur when sending a signal with a push-button dial telephone.

Start

1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
3. Press the start key.

The screen for the selected item appears.

Setting

1. Change the setting using the numeric keys.

E.g.: When set to 8, the DTMF output level is -8 dBm.

2. Press the start key. The value is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Description

DTMF TX LV(H)

Sets the DTMF (high-frequency group) output level.

DTMF TX LV(L)

Sets the DTMF (low-frequency group) output level.

Description

Setting range

DTMF (high-/low-frequency group) output level

0 to 255

Summary of Contents for DF-420









































































































































































































































































































Search results

Summary of Contents for DF-420

Reviews:

Related manuals for DF-420

Brands by name

Popular brands

Kyocera DF-420, Service Manual

Search results

Summary of Contents for DF-420

Reviews:

Related manuals for DF-420

Brands by name

Popular brands