manualshive.com logo in svg

Kyocera DF-420, Service Manual, Page: 49 / 296

Share
Download
Kyocera DF-420 Service Manual Download Page 49

3MX

1-3-28

U905

Checking counts by optional devices
Description

Displays the counts of DP or finisher.

Purpose

To check the use of DP and finisher.

Method

1. Press the start key.
2. Select the device, the count of which is to be checked using the cursor up/down keys.
3. Press the start key. The count of the selected device is displayed.

DP

Finisher 

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

U942

Setting of deflection for feeding from DP
Description

Adjusts the deflection generated when the DP is used.

Purpose

Use this mode if an original non-feed jam, oblique feed or wrinkling of original occurs when the DP is used.

Setting

1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.

3. Press the interrupt key.
4. Place an original on the DP and press the start key to make a test copy.
5. Change the setting value using the cursor left/right keys.

The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
If an original non-feed jam or oblique feed occurs, increase the setting value. If wrinkling of original 
occurs, decrease the value.

6. Press the start key. The value is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Display

Description

DP

Counts of DP

FINISHER

Counts of optional finisher

Display

Description

ADP

No. of single-sided originals that has passed through the DP

RADP

No. of double-sided originals that has passed through the DP

Display

Description

CP CNT

No. of copies that has passed

STAPLE

Frequency the stapler has been activated

BUNDLE EJECT

Frequency the bundle discharge has been activated

Display

Description

Setting range

Initial setting

FEED MOT

Deflection in the original feed motor

-10 to 20

0

REV MOT

Deflection in the original switchback motor

-10 to 20

0

Summary of Contents for DF-420









































































































































































































































































































Reviews:

No comments