Kyocera AK-9110 Installation Manual Download Page 74

Page: 74 / 401

2-58

The main unit setup procedure > Adjustment

[CONFIDENTIAL]

(3) Print position adjustment (Print position)

U034 leading edge timing adjustment

Get into U034 Adj Paper Timing.

Select [Start Position].

•

Select [Full (Shift)] for lead edge timing adjustment in full speed.

Press [System Menu/Counter] key.

•

Set feed cassette or paper speed in Test Print (PG) mode.

•

When the optional PF is installed, set the paper feeding source other than MP tray.

Press [Start] key to output the adjustment chart.

Press [System Menu/Counter] or [Stop] and get back to Full (Shift) screen.

•

Select [1st Side] in case of first side adjustment and enter the value. [mm]

•

Select [2nd Side] in case of second side adjustment and enter the value. [mm]

Change the setting value by using [+] [-] keys or the numeric keys.

•

The image moves backward by increasing setting value and moves forward by decreasing the value.

• [Full (Shift)]: (Output from cassette, MP tray other than following setting) * With feed accelerating before registration

• [Full]: (Output to MP tray or selecting low paper feed speed) * Without feed accelerating before registration

• [Full (SRA3/12x18)]: * Print Full speed for SRA3/12x18 with duplex only

• [Half]: *Print for 1200dpi or IJ mat paper

One side

First side of duplex

Second side of duplex

Full(Shift)

U034

1st Side

2nd Side

-1.50

0.00

Full

U034

1st Side

2nd Side

-1.50

0.00

Half

U034

1st Side

2nd Side

-1.50

0.00

21.5mm

Summary of Contents for AK-9110


















































































































































































































































































































































































































Search results

Summary of Contents for AK-9110

Reviews:

Related manuals for AK-9110

Brands by name

Popular brands

Kyocera AK-9110, Installation Manual

Search results

Summary of Contents for AK-9110

Reviews:

Related manuals for AK-9110

Brands by name

Popular brands