3-89
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
122
Mount the Multi Bypass Tray on the paper feeder (screw x2: M4x6).
•
Align the holes at the front and rear of the Multi Bypass Tray with the joint pins on the paper feeder.
Connecting the Multi Bypass Tray to the paper feeder
123
At the rear, open the clamp to disconnect the three harness cables (harness clamp
x1).
NOTE
• The fixing screw is also provided with the Multi Bypass Tray.
NOTE
• The bypass unit weighs 20 kg (44 lb.). You may need assistance to set the bypass unit on top of the paper
feeder.
• Fixing screws are provided with the Multi Bypass Tray.