Kyocera AK-9110 Installation Manual Download Page 383

Page: 383 / 401

6-53

Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)

[CONFIDENTIAL]

Set the maximum sized paper such as over A3/Ledger paper.

Select [Check] in U744 <Head cleaning> and the test chart is output automatically.

Place the test chart on the scan table and scan it.

(The number of clogged nozzle come up by scanning the chart.)

If the non-discharge area is observed, run manual print head cleaning U744
[Cleaning] to the color that has non-discharge area.

•

Run the strong purge (cleaning) only for the color that has non-discharge area.

Output the test chart by selecting [Check] and scan it to check the head condition.

If it gets less clogged nozzle, repeat step 78 to 79 with following order.

Run the strong purge. (cleaning) only for the color that has non-discharge area.

Run the extra strong purge. (cleaning) only for the color that has non-discharge area.

When ink non-ejection has occurred

Ink ejection confirmation chart

Summary of Contents for AK-9110


















































































































































































































































































































































































































Search results

Summary of Contents for AK-9110

Reviews:

Related manuals for AK-9110

Brands by name

Popular brands

Kyocera AK-9110, Installation Manual

Search results

Summary of Contents for AK-9110

Reviews:

Related manuals for AK-9110

Brands by name

Popular brands