Kyocera AK-9110 Installation Manual Download Page 59

Page: 59 / 401

2-43

The main unit setup procedure > Ink initial supply (Set up flow)

[CONFIDENTIAL]

Set the maximum sized paper such as over A3/Ledger paper.

Select [Check] in U744 <Head cleaning> and the test chart is output automatically.

Place the test chart on scan table and scan it.

(The number of clogged nozzle come up by scanning the chart.)

If the discharged area is observed, perform manual print head cleaning U744
[Cleaning] to the color that has discharged area.

•

Perform the strong purge (cleaning) only for the color that has discharged area.

Output the test chart by selecting [Check] and scan it to check the print head
condition.

If it gets less clogged nozzle, repeat the step 23 to 24 with following order.

Perform the strong purge. (cleaning) only for the color that has discharged area.

Perform the extra strong purge. (cleaning) only for the color that has discharged area.

When ink non-ejection has occurred

Ink ejection confirmation chart

Summary of Contents for AK-9110


















































































































































































































































































































































































































Search results

Summary of Contents for AK-9110

Reviews:

Related manuals for AK-9110

Brands by name

Popular brands

Kyocera AK-9110, Installation Manual

Search results

Summary of Contents for AK-9110

Reviews:

Related manuals for AK-9110

Brands by name

Popular brands