6-25
Machine transportation after setup > Procedure for the main unit transportation (Truck transportation)
[CONFIDENTIAL]
42
Close the front left upper cover [A] and the front right upper cover [B].
43
Turn the main and the power switch on.
44
Enter maintenance mode.
45
Select [Waste Ink Pump] in U030 Motor operation check, and press [Start] key to start
pump and press [Stop] key to stop.
•
Perform the pump operation min.60 seconds and max.90 seconds.
•
Collect the waste ink on the tray to the waste ink tank
46
Run U002 Factory default setting, open DP [B], hold up the triangle mark side of the
optical lock cover [A] and slide it then remove it.
47
Attach the cover [A] in the opposite direction and fix the scanner carriage.
(Place triangle symbol to rear for lock position.)
