Kyocera 6030, Operation Manual

Page: 95 / 124

Troubleshooting
6-7
Now restoring stored data
in HDD.
( Please wait. Now
maintaining stored data. )
— Performing hard disk maintenance.
Wait until the process is completed. —
The waste toner box
almost full. Call service.
( The waste toner container
is almost full. Call service. )
— Contact your Service Representative
or Authorized Service Center. —
The waste toner box is full.
Call service.
( The waste toner container
is full. Call service. )
Check the waste punch
box.
( Check Punch Hole box. )
Is the container for hole punch waste
paper in the optional document
finisher full? Refer to the document finisher
Operation Guide and dispose of the
punch waste paper in the box.
—
Out of staples. Add
staples.
( Stapler empty. Add
staples. )
Is the optional document finisher out
of staples? Refer to the document finisher
Operation Guide and replace the
staple cartridge.
—
Time for maintenance. — Periodic maintenance is required to
keep your copier in good condition.
Contact your Service Representative
or Authorized Service Center
promptly. —
Paper misfeed. Remove
paper. — If a paper jam occurs, the location of
the jam will be indicated on the touch
panel and the copier will stop. Leave
the copier on (| position) and follow
the instruction to remove the jammed
paper. page 6-9
Open drawer #, check and
remove paper from inside
of the machine.
( Open cassette #, check
and remove paper from
inside of machine.
)
Is there a paper jam in the cassette? Remove any jammed paper from the
cassette. page 6-9
Remove paper from inner
tray of Finisher. Is there any paper left in the optional
document finisher? Remove all paper left in the document
finisher. —
Staple jam. Remove
staples.
( Staple jam. Remove
staple(s). )
Is a staple jammed in the optional
document finisher? Refer to the document finisher
Operation Guide and remove the
jammed staple.
—
Call service. Is this message displayed even after
opening and closing the front cover? Make a note of this message (C
followed by a number), turn off the
copier (
{
position), unplug the power
cord, and contact your Service
Representative or Authorized Service
Center.
—
Error Messages Checkpoints Corrective Actions Reference
Page