Kyocera 6030, Operation Manual

Page: 16 / 124

xiv
If the floor is delicate against casters, when this product is moved after installation, the floor
material may be damaged.
During copying, some ozone or chemical is released, but the amount have no affect on the
human body. If, however, the copier is used over a long period of time in a poorly ventilated
room or when making an extremely large number of copies, the smell may become unpleasant.
To maintain the appropriate environment for copy work, it is suggested that the room be properly
ventilated.
Power supply/Grounding the copier
Warning
Do not use a power supply with a voltage other than that specified. Avoid multiple
connections in the same outlet. These types of situations present a danger of fire or
electrical shock.
Plug the power cord securely into the outlet. If metallic objects come in contact with
the prongs on the plug, it may cause a fire or electric shock.
Always connect the copier to an outlet with a ground connection to avoid the danger
of fire or electrical shock in case of an electric short. If an earth connection is not
possible, contact your service representative.
Other precautions
Connect the power plug to the closest outlet possible to the copier.
The power supply cord is used as the main disconnect device. Ensure that the socket/outlet is
located/installed near the equipment and is easily accessible.
Handling of plastic bags
Warning
Keep the plastic bags that are used with the copier away from children. The plastic
may cling to their nose and mouth causing suffocation.
Precautions for Use
Cautions when using the copier
Warning
Do not place metallic objects or containers with water (flower vases, flower pots,
cups, etc.) on or near the copier. These types of situations present a danger of fire or
electrical shock should the objects fall inside.
Do not remove any of the covers from the copier as there is a danger of electrical
shock from high voltage parts inside the copier.