Kyocera 6030, Operation Manual

Page: 54 / 124

Preparing to Copy
2-18
Loading Originals on the Platen
To copy books, magazines, or other originals that cannot be loaded in the document processor,
open the document processor and place the original directly on the platen.
Adjust how the document processor opens by using
the document processor angle adjustment lever. Move
the lever left to open the document processor 60
°
and
move it right to open the document processor 30
°
.
IMPORTANT: Before opening the document
processor, be sure that there are no originals left on
the original table or on the original eject table.
Originals left on the original table or on the original
eject table may fall off the copier when the document
processor is opened.
Do not move the document processor angle
adjustment lever when the document processor is
open. Close the document processor before using the
lever.
1 Open the document processor.
2
Place the original. Put the copying side facedown and
align it flush against the original size indicator plates
with the back left corner as the reference point.
Inch models