Kyocera 6030, Operation Manual

Page: 40 / 124

Preparing to Copy
2-4
3 Holding the paper width adjusting tab, move the paper
width guide to fit the paper.
NOTE: Paper sizes are marked on the cassette.
To switch between inch and metric paper sizes, slide
the size adjustment switch.
1 Holding the paper width adjustment tab, move the
paper width guide to anywhere that the paper size
scale is not indicated.
2 Rotate the size adjustment switch ( A ) 90 degrees,
horizontal to vertical.
3 Slide the size adjustment lever ( B ) to upper ( C ) or
lower ( I ) position.
I : Inches
C : Metrics
4
Align the paper flush against the right side of the
cassette as you load it.
IMPORTANT: Be sure that the paper length and width
guides rest securely against the paper. If there is a
gap, readjust the guides to fit the paper. The gap may
cause a paper jam.
Before loading the paper, be sure that it is not curled
or folded. Paper that is curled or folded may cause
paper jams.
Ensure that the loaded paper does not exceed the
level indicated. Paper that exceeds the level indicated
may cause a paper jam.
4 Rotate the size adjustment switch 90 degrees, vertical to horizontal.
A
B