Kyocera 1102R73AS0, Operation Manual

Page: 80 / 426

2-30
Installing and Setting up the Machine > Network Setup
Setting Wi-Fi Direct
When the wireless network function is available on the machine, setting Wi-Fi Direct enables you to print from the Wi-Fi
Direct environment. The configuration methods are as follows:
Configuring the Connection from the Operation Panel on This Machine
Connecting to Computers or Handheld Devices that Support Wi-Fi Direct
1
Display the screen.
[ System Menu/Counter ] key > [ System/Network ] > [ Network ] > [ Wi-Fi Direct Settings ] >
[ Wi-Fi Direct ]
2
Configure the settings.
[ On ] > [ OK ]
3
Restart the network.
[ System Menu/Counter ] key > [ System/Network ] > [ Network ] > [ Restart Network ] > [ Yes ]
4
Specify the machine name from the computer or handheld
device.
If a confirmation message appears on the operation panel of the machine, select [ Yes ].
The network between this machine and the handheld device is configured.
Connecting to Computers or Handheld Devices Unsupported Wi-Fi Direct
Here, we'll explain the procedures for connecting to iOS handheld devices.
1
Display the screen.
[ System Menu/Counter ] key > [ System/Network ] > [ Network ] > [ Wi-Fi Direct Settings ] >
[ Wi-Fi Direct ]
2
Configure the settings.
[ On ] > [ OK ]
3
Restart the network.
[ System Menu/Counter ] key > [ System/Network ] > [ Network ] > [ Restart Network ] > [ Yes ]
4
[Home] key > [Task Screen] > [Wi-Fi Direct]
5
Note the network name (SSID), IP address, and password.
6
Configure the handheld device.
1
[ Settings ] > [ Wi-Fi ]
2
Select the network name (SSID) appeared in step 5 from the list.
3
Enter the password that was provided in step 5 > [ Connect ]
The network between this machine and the handheld device is configured.