Kyocera 1102R73AS0, Operation Manual

Page: 359 / 426

10-18
Troubleshooting > Troubleshooting
Cannot print the
specified number of
copies.
*1
— Only one copy is available. Select
[
Continue ] to continue printing.
Select [ Cancel ] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Uncheck [ RAM Disk ] in the
[ Device Settings ] tab of the
printer's properties.
NOTE
If you unchecked the [ RAM Disk ],
check the [ RAM Disk ] again after
the printing is completed. If not,
print speed may be reduced.
—
Do you want to print the data stored
in the USB memory? Only one copy is available. Select
[
Continue ] to continue printing.
Select [ Cancel ] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Reduce the number of copies to
be printed at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
•
Select [ Copy Priority ] of
Optional Memory in System
Menu.
NOTE
Before changing the Optional
Memory setting, contact your
administrator.
Cannot process this
job.
*1
― This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select [
End ].
―
Cannot recognize. ― Make sure your ID card has been
registered. Card
Authentication
Kit(B)
Operation
Guide
Cleaning the laser
scanner… — The machine is under the
adjustment to maintain its quality.
Please wait. ―
*1 When Auto Error Clear is set to [ On ], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-40)
Message Checkpoints Corrective Actions
Reference
Page