Kyocera 1102R73AS0, Operation Manual

Page: 357 / 426

10-16
Troubleshooting > Troubleshooting
Responding to Messages
If the touch panel or the computer displays any of these messages, follow the corresponding procedure.
A
B
NOTE
When contacting us, the serial number will be necessary.
To check the serial number, refer to the following:
Checking the Equipment's Serial Number (page i)
Message Checkpoints Corrective Actions
Reference
Page
Access point was not
detected. ― Check if the access point has been
set correctly. ―
Activation error. ― Turn the power switch off and on. If
the error exists, contact
administrator. page 2-10
Add the following paper
in cassette #. Is the indicated cassette out of
paper? Load paper.
Select [
Paper Selection ] to select
the other paper source. Select
[
Continue ] to print on the paper in
the currently selected paper source.
page 3-2
Add the following paper
in the multi purpose tray. Does the selected paper size
matches the paper size loaded in
the specified paper source? Select [ Continue ] to continue
printing.
Select [
Cancel ] to cancel the job.
—
Is the indicated cassette out of
paper? Select [ Paper Selection ] to select
the other paper source. Select
[
Continue ] to print on the paper in
the currently selected paper source.
page 3-2
Adjusting… ― The machine is under the
adjustment to maintain its quality.
Please wait. —
Message Checkpoints Corrective Actions
Reference
Page
Box is not found. ― The specified box cannot be found.
Job is canceled. Select [
End ].
—
Box limit exceeded.
*1
*1 When Auto Error Clear is set to [ On ], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-40)
Is [ End ] displayed on the screen? The specified box is full, and no
further storage is available; Job is
canceled. Select [
End ]. Try to
perform the job again after printing
or deleting data from the box.
—