Kyocera Mita FS-1128MFP, Operation Manual

Page: 42 / 192

FAX Operation (Basic)
3-10 OPERATION GUIDE
Reception Starts
1
When a fax has been sent to you, the machine
rings the registered number of times, and then
starts receiving the fax.
After reception has started, the Receive indicator
blinks.
NOTE:
You can change the number of times the
ringing tone rings. (Refer to Rings on page 6-6 .)
To cancel the reception, refer to Cancelling
Transmission (Disconnection of Communication) on
page 3-13
.
Memory Reception
When the machine cannot print a fax due to paper
running out or a paper jams, it temporarily stores
originals that have been sent in the image memory.
When the machine returns to the printable state,
printing starts.
During memory reception, FAX Reception Printing Jobs
are displayed on Printing Jobs of the Status screen. To
print the received originals, supply paper or remove
jammed paper.
NOTE:
For the Status screen, refer to the machine’s
Operation Guide .
Reception Print
2
Received originals are output on the top tray with
the print side facing downward. Up to 150 sheets of
plain paper (80 g/m²) can be held on the top tray.
However, the number of sheets varies with the
condition of the paper to be used.
IMPORTANT:
• The number of sheets that can be held varies with
the output tray. Refer to the machine’s Operation
Guide . When the number of sheets to be printed
exceeds the number of sheets that can be held,
remove all the paper on the top tray.
• Even if the machine is not capable of printing due to
paper running out or a paper jam, it can still receive
faxes (memory reception).