Kyocera Mita FS-1128MFP, Operation Manual

Page: 62 / 192

FAX Operation (Advanced)
4-2 OPERATION GUIDE
Delayed Transmission
When you have set a transmission start time, this function automatically sends originals at the preset time. You
can use delayed transmission together with the broadcast transmission function, etc.
The method for sending originals to one destination after setting the start time is explained here.
IMPORTANT: If the current time is incorrect, the communication cannot be performed correctly at the specified
time. If the indicated current time is incorrect, adjust the time correctly. In this case, adjust the time. For details,
refer to
Date and Time Entry on page 2-6 .
NOTE:
You cannot select direct transmission.
Set the time from between 00:00 and 23:59 in one-minute increments.
Together with standby transmission and interrupt send, you can set up to 30 destinations for delayed
transmission.
When two or more delayed transmissions are set for the same time, the communication will start in the order
that the delayed transmissions have been set. When delayed transmissions have been set in reverse order,
however, sending of originals to be sent to the same destination is prioritized over the ones to be sent to different
destinations.
You can cancel a delayed transmission any time before the specified transmission time. You can also send a
delayed transmission before the specified time. (Refer to
Cancelling and Sending Delayed Transmissions
(Queued) on page 3-13 .)
You can change destinations of a delayed transmission any time before the specified transmission time. (Refer
to
Checking Scheduled Job on page 4-3 .)
Batch Transmission Function
When fax originals to be sent to the same destination are set to the same transmission start time with delayed
transmission, you can send up to 10 groups of originals using batch transmission. This function prevents
repeated communication to the same destination and reduces the communication cost.
NOTE:
You cannot send originals as a batch transmission in the case of direct transmission.
In the case of broadcast transmission, when you have set two or more groups of originals to the same
transmission start time, and each group includes the same receiving system fax number, you cannot send the
originals as a batch transmission.
When the transmission start time has come, and there are fax originals waiting for redial to the same receiving
system, the waiting originals are also sent together as a batch transmission.
When job accounting is ON, only the originals with the same account ID set using delayed transmission are sent
as a batch transmission.
1
Press the FAX key.
2
Place the originals.
3
Press the Function Menu key.
4
Press the U or V key to select [FAX Delayed TX].