Kyocera Mita FS-1050, Operation Manual

Page: 130 / 209

Printing from Windows Applications
2-34
5
To print the instruction sheet, click the Print Instructions check box.
6
Click Flip on Long Edge if you want to bind the output on the long edge.
Or, click Flip on Short Edge if you want to bind the output on the short
edge.
7
To set the width of the gutter, click the Gutter Settings button and enter
the desired value in the Gutter field. The width of the gutter ranges from
5.00 to 25.4 mm or from 0.20 to 1.00 inch.
8
Click the OK button to return to the Print dialog box.
9
Click the OK button to start printing. The following message box will
appear on the screen. Wait until all the even pages are printed and
put the printed paper back into the paper source again before
clicking the OK button.