Kyocera Mita FS-1050 Operation Manual Download Page 183

Page: 183 / 209

Memory (CompactFlash) Card

B-8

B.3 Memory (CompactFlash) Card

Insert the memory (CF) card into the card slot located on the rear of the

printer. A memory card is a microchip card that may contain option fonts,

macros, forms, etc. The printer reads the contents of the card into its

internal memory when printer is turned on. The presence of this data in

the printer memory can be confirmed on the status page printout.
For details of available memory cards, contact your Kyocera Mita dealer.

Turn off the printer.

Never insert or remove a memory card while the printer power is on.

Failure to turn the power switch off will immediately halt the printer with

Memory

card

err20

message (this message may not always appear).

It also could result in any damage to the printer’s electronic parts or the

memory card. Turn the power switch on again to restart the printer.

Remove the two screws from the option interface slot cover and

remove the slot cover.

Note

Screws

Option Interface Slot Cover

Summary of Contents for FS-1050


















































































































































































































Search results

Summary of Contents for FS-1050

Reviews:

Related manuals for FS-1050

Brands by name

Popular brands

Kyocera Mita FS-1050, Operation Manual

Search results

Summary of Contents for FS-1050

Reviews:

Related manuals for FS-1050

Brands by name

Popular brands