Kyocera Mita FS-1050, Operation Manual

Page: 41 / 209

Using the Operator Panel
1-31
Selecting the Default Font
You can select the font to be used by default with the current interface. In
addition to the internal fonts, all fonts downloaded to the printer memory,
the memory card or optional ROM can be selected as the default font.
From this menu, you can also select the type and pitch for Courier and
Letter Gothic, the size of the default font, as well as print a font list.
Selecting the default font
1
Press the
MENU
key.
2
Press the or key until
Font >
appears.
3
Press the > key. Press the or key until
> Font Select >
appears.
4
To select an internal font, make sure that
Internal
is displayed and
press the > key. The message display changes as shown below. If
Internal
is not displayed, press the or key to display it.
To select an option font, press the ENTER key while
> Font Select
>
is displayed. Press or key until the message display indicates
Option
and press the ENTER key. Pressing the > key after that
displays the font selection shown above. This operation is possible
only when option fonts are installed in the printer.
The letter before the number indicates the type of font as shown
below:
Letter
Letter Letter
Letter Description
Description Description
Description
I
Internal font
S
Soft (downloaded) font
M
Fonts in a memory card
H
Fonts in a RAM disk.
O
Fonts in an optional ROM
Font >
>Font Select >
Internal
>> I000