Kyocera Mita DF-75, Service Manual

Page: 86 / 199

2-62
CHAPTER 2 OUTLINE OF OPERATION
Staple/fold
motor (M7)
Folding position
sensor (PI10)
Jam check
Folding position
sensor (PI10)
Jam check
Normal
Jam
approx. 10.5sec. approx. 10.5sec.
Staple/fold
motor (M7)
7.1.4 Folding Position Sensor Stationary Jam (J84)
In bind mode, paper does not leave the holding position sensor approximately 10.5 sec after
the staple/fold motor is driven.
F02-701-05
7.1.5 Power-On Jam (J87)
Paper is detected inside the finisher at power-on.
7.1.6 Door Open Jam (paper present) (J88)
The finisher is disconnected from its host machine or the front door, or the upper cover is
opened while the system is in operation (paper on the move).
7.1.7 Staple Jam (J86)
The staple home position sensor (PI19) does not go OFF 600 msec after the stapler is
driven. Or, it does not return to its home position (where the sensor goes ON).