Kyocera Mita DF-75, Service Manual

Page: 49 / 199

2-25
CHAPTER 2 OUTLINE OF OPERATION
3.2 Stapling Operation
When stacking and alignment of paper on the processing tray are complete, the finisher con-
troller PCB drives the paddle motor (M2) in the reverse direction and lowers the swing guide.
When the swing guide descends, the paper stack is sandwiched between the upper and lower
stack delivery rollers.
The finisher controller PCB moves the stapler for stapling according to the specified sta-
pling position (when rear 1-point stapling is specified, the stapler does not move but it staples
at the standby position). As the stapler moves forward, the processing tray stopper is folded
forward.
F02-302-01
Stapler
Swing guide
Stack delivery roller (upper)
Stack
delivery
roller
(lower)
Processing tray stopper
Paper stack
Delivery tray