Kyocera Mita DF-75, Service Manual

Page: 85 / 199

2-61
CHAPTER 2 OUTLINE OF OPERATION
7.1.1 Inlet Sensor Delay Jam (J80)
The inlet sensor does not detect paper approximately 1.5 sec after the host machine gener-
ates the delivery signal.
Feed motor (M1)
Inlet sensor (PI1)
Jam check
Feed motor (M1)
Inlet sensor (PI1)
Jam check
Normal
Jam
approx. 1.5sec.
Host machine delivery signal
approx. 1.5sec.
Host machine delivery signal
F02-701-02
7.1.2 Inlet Sensor Stationary Jam (J81)
The paper does not leave the inlet sensor approximately 2 sec after the inlet sensor has de-
tected its leading edge.
Feed motor (M1)
Inlet sensor (PI1)
Jam check
Inlet sensor (PI1)
Jam check
Normal
Jam
approx. 2sec.
Feed motor (M1)
approx. 2sec.
F02-701-03
7.1.3 Folding Position Sensor Delay Jam (J83)
In bind mode, the folding position sensor does not detect paper 1200 msec after the interme-
diate processing tray starts to send paper to the stapling position.
Folding position
sensor (PI10)
Jam check
Folding position
sensor (PI10)
Jam check
Normal
Jam
1200 ms
Delivery motor (M3) Delivery motor (M3)
1200 ms
F02-701-04