KYMCO SUPER8 50, Service Manual, Page: 177 / 188

16
. INSTRUMENT/SWITCHES/LIGHTS
16-2
SUPER8 50 2T
FUEL UNIT
REMOVAL
Remove the seat. (2-4)
Remove the body cover. (2-5)
Disconnect the fuel unit wire connectors.
Remove the fuel unit.
INSPECTION
Remove the fuel unit.
Measure the resistance between the fuel
unit wire terminals with the float at upper
and lower positions.
RESISTANCES Unit:
Ω
Wire Terminals Upper Lower
G
～
Y/W
20
～
40 560
～
580
FUEL GAUGE INSPECTION
Connect the fuel unit wire connectors and
turn the ignition switch “ON”.
Check the fuel gauge needle for correct
indication by moving the fuel unit float up
and down.
Float Position Needle Position
Upper “F” (Full)
Lower “E” (Empty)
No Smoking!
＊
Be careful not to bend or damage the
fuel unit float arm.
＊
Do not damage the fuel unit wire.
＊
Fuel Unit Wire
Fuel Unit
Before performing the following test,
operate the turn signals to determine
that the battery circuit is normal.
＊