KYMCO SUPER8 50, Service Manual, Page: 167 / 188

15
. ELECTRICAL EQUIPMENT
15-6
SUPER8 50 2T
RESISTOR INSPECTION
Remove the frame front cover. (
Ö
12-3)
Measure the resistance between the resistor
with ground.
Resistances:
Resistor: 9.9
～
12.0
Ω
REGULATOR/RECTIFIER INSPECTION
Remove the front cover. (
Ö
12-3)
Disconnect the regulator/rectifier wire coupler
and remove the bolt to remove the
regulator/rectifier.
Measure the resistances between the
terminals.
Replace the regulator/rectifier if the readings
are not within the specifications in the table
below.
Model Brand Range
SP-10D Sanwa K
Ω
TH-5H Kowa 100
Ω
•
Due to the semiconductor in circuit, it
is necessary to use a specified tester
for accurate testing. Use of an
improper tester in an improper range
may give false readings.
•
Use a Sanwa Electric Tester (07208-
0020000) or Kowa Electric Tester
(TH-5H). The proper range for
testing is listed below.
＊
Coupler
Faulty resistor is the cause of faulty
operation of the auto bystarter.
＊
Resister
Regulator/Rectifier
Peach Red
Yellow Green
Black