KYMCO SUPER8 50, Service Manual, Page: 148 / 188

13
.
STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK
13-12
SUPER8 50 2T
Remove the pistons from the brake caliper.
If necessary, use compressed air to squeeze
out the pistons through the brake fluid inlet
opening and place a shop towel under the
caliper to avoid contamination caused by the
removed pistons.
Check each piston cylinder for scratches or
wear and replace if necessary.
Push the piston oil seals outward to remove
them.
Clean each oil seal groove with brake fluid.
Check each piston for scratches or wear.
Measure each piston O.D. with a micrometer
gauge.
Service Limit : 33.90mm
Check each caliper cylinder for scratches or
wear and measure the cylinder bore.
Service Limit : 33.45mm
Compressed Air
Piston Oil Seals
Be careful not to damage the piston
surface.
＊