KYMCO SUPER8 50, Service Manual, Page: 141 / 188

13
.
STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK
13-5
SUPER8 50 2T
FRONT WHEEL BEARING
Remove the side collar and dust seal.
Turn the inner race of each bearing with your
finger to see if they turn smoothly and quietly.
Also check if the outer race fits tightly in the
hub.
Replace the bearings if the races do not turn
smoothly, quietly, or if they fit loosely in the
hub.
BEARING REPLACEMENT
Remove the front wheel bearings and
distance collar.
Bearing Remover
Bearing Remover Head, 12mm
Pack all bearing cavities with grease.
Drive in the left bearing.
Install the distance collar.
Drive in the right bearing.
Driver handle A
•
Do not allow the bearings to tilt while
driving them in.
•
Drive in the bearing squarely with the
sealed end facing out.
＊
Wheel Bearing
Special
Special
Dust Seal
Bearing Remover
Driver Handle A
Side Collar