KW DAVID 613, Operating Manual, Page: 8 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 8 -
1.0
SYSTEM DESCRIPTION
1.1 PRODUCT LIABILITY AND WARRANTY
All work on this microprocessor system must only be performed by qualified staff (electrician or electri-
cally trained person). Please note the safety instructions in this manual.
This manual is therefore directed to the elevator technician who installed the control and putting it into
service, as well as to control the farmer who installs the device in the control panel and performs the
necessary wiring.
We guarantee the product accuracy and not a product that we publish this information and operating
instructions. There is no guarantee, legal responsibility, nor any liability for the cost-or error-free opera-
tion for a purpose other than the grants defined in section 1.2.
WARRANTY CONDITIONS
The function of the device according to this manual are guaranteed for 12 months. Prerequisite for the
free shipment of spare parts is the demonstrated compliance with the operating instructions for storage,
transportation, installation, commissioning and operation, and maintenance. The General Terms and
Conditions of KW AUFZUGSTECHNIK GmbH.
1.2 SAFETY CONDITIONS
IN GENERAL
Running the controller system DAVID-613 without casing is forbidden, because of the high voltage in
there. If you do run it without casing, there could be personal damage.
Disregard of this provision is a risk of serious personal injury and property damage. All work on the
microprocessor system may be performed only by qualified personnel. The following safety rules are
observed: DIN VDE 0100, DIN VDE 0110, IEC 364, IEC-664.
People who are familiar with the installation and commissioning of Microprocessor Systems DAVID-613,
respecting the national accident prevention regulations and demonstrate appropriate professional qual-
ifications are properly qualified personnel in accordance with this manual.
USE OF THE CONTROLLER SYSTEM DAVID-613
The controller system DAVID-613 is device for the use in elevators. Other using is forbidden without
the prior written consent of KW Aufzugstechnik GmbH. The following laws must be considered, when
you are building in the inverter:
- EG-Guidelines 89/392/EWG (machine guideline)
- EN 60204
- Low Voltage Guidelines 73/23/EWG
- EMV-Guideline (89/336/EWG)
- prEN 50178/DIN VDE 0160
- EN 60439-1/DIN VDE 0660 Teil 500
-
EN 60146/DIN VDE 0558
TRANSPORT AND MOUNTING
The microprocessor system DAVID-613 contains electrostatically sensitive components which can be
easily damaged by improper handling. Electrical components must not be mechanically damaged or
destroyed. To connect the device it is not necessary to remove the appliance lid. The installation and
cooling of equipment must be carried out in accordance with the provisions of the manual.
The control computer must be protected from excessive strain during transport and handling. The elec-
tronic components and contacts must be avoided.
SERVICE
Only parts of manufacturer are allowed to use. The lead gel accumulator is aging between the lifetime.
With demand for highest availability a preventive exchange is recommended after one year. The clean-
ing is permissible only with halogeneous-free means.