KW DAVID 613, Operating Manual, Page: 248 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 248 -
red button on the HPG-60 or the quick but-
ton on the inspection control.
The elevator car is driven flush with inspec-
tion in the lowest stop and with the help of
the HPG-60, this stop is synchronized. As a
result, all floors are learned!
3.9A Floors learn with the method„ Manually start“
Use the maintenance key downwards to se-
lect the setting "manually approach".
Use the yellow buttons to set the value
"Yes".
.. and press the ENTER key !
Display now indicates that the lowest
floor should be installed…
OR
Therefore, the lowest floor will start manu-
ally
( INSPECTION OR RETURN CONTROL )
Now press the red "UP" button in the
HPG or press the QUICK button on the in-
spection bulb
Sequence: ! The piezo will sound in the
cabin for 1 second and the text "Floor
stored" will be displayed as confirmation in
the 3rd line
Learn next floor by :
Pressing the UP-button on the inspection
bulb or if the HPG-60 is being used, press
the ENTER button. The 3
rd
line is activated:
Display 3 rd line: “Input: UP button”.
1.) The floor-02 with start inspection (or re-
turn).
2.) Press the QUICK button on the inspec-
tion bulb, or press the UP button if the
HPG-60 is being used.
Note: If the penultimate floor is reached, then the top floor is automatically occupied (limit
switch TOP:-100mm)
Result: The piezo sounds in the cabin for 1 second and in the 3 rd line the text “ Floor
saved” is displayed as confirmation
Now switch the elevator to normal opera-
tion
Go to STEP 3.10