KW DAVID 613, Operating Manual, Page: 252 / 264

KW Aufzugstechnik GmbH OPERATING MANUAL DAVID-613
DAVID-D613-V125-E 13.04.2021 Page - 252 -
I06 Function test – Self-Monitoring of the Braking Elements after EN81-
1/2:1998+A3:2009
Generally
Due to the development of the software, the function of the brake elements in-plant monitoring at KW
Aufzugstechnik GmbH in the testing, as well as in the on-site commissioning of the lift system must be
examined. The description of the functional test is part of the manual.
Test cable break - Monitoring Input 1
1.) Switch off the s ignal line at the monitoring input channel 1.
2.) Return Motion Drive UP or DOWN
3.) The Controller DAVID 606/613/2005 gives the error mes-
sage
"F54 – Brake Element Synchronization” and locks.
More trips are not possible!
4.) Switch on the s ignal line at the monitoring input chan-
nel 1.
5.) With the Return-Drive to try to take a ride. A drive may be
not possible!
6.) In the menu C0 the Controller DAVID 606/613/2005 can be
unlocked in the fault memory by selecting the error. The
elevator system is ready to start again.
Removing the monitoring channel 1
Test cable bridge - Monitoring Input 1
1.) Switch off the s ignal line at the monitoring input channel 1
and put in a jumper between terminal 200 (+24 V DC) and
channel 1.
2.) Return Motion Drive UP or DOWN
3.) The Controller DAVID 606/613/2005 gives the error
message "F51 – Brake Element Function” and locks.
More trips are not possible!
4.) Put off the jumper between the terminal 200 and channel 1 .
Switch on the s ignal line at the monitoring input channel 1.
5.) With the Return-Drive to try to take a ride. A drive may be
not possible!
6.) In the menu C0 the Controller DAVID 606/613/2005 can be
unlocked in the fault memory by selecting the error. The
elevator system is ready to start again.
Setting the jumper between 20o and Chan-
nel 1
Repeat the test steps
After the two test steps were carried out for the monitoring braking element 1, then for all other brake
circuits have now equivalent to the test steps are carried out!