Kverneland 2316M, Technical & Service Manual

Page: 22 / 60

Transport position
Transport safety
Transport position
Transport position
Transport position
Transport position
Transport position
Transport position
• The machine needs only one
single acting hydraulic outlet
for working/transport position.
• The machine is set to the
transport position in the
following way: Activate the
tractor's lift arms and raise the
machine completely free of
the ground.
• Activate the tractor's
hydraulics and the machine is
lifted up to the transport
position.
• Release the cord once the
cutting unit is raised
approximately halfway up.
• Release the pressure in the
hydraulic system. When the
machine is in the transport
position, the hydraulic system
must be depressurized.
• Activate and lower the
tractor's lift arms down to the
fixed working height.
• Pull and hold the cord. • Check that the lock device
engages in the lock catch on
the machine's hydraulic
cylinder.
• Lock the device with the pin.
3.1 Transport position
22