Kverneland 2316M, Technical & Service Manual

Page: 49 / 60

Cutter bar repair
Assembly of bearing house(s)
Cutter bar repair Cutter bar repair
Assembly of bearing house(s)
• Use grease in O-ring grove
and surface around it to
prevent erosion.
• Fit new O-rings on the bearing
units.
NB! Make sure the O-ring is
placed correct in the groove of
the bearing unit.
• Fit the bearing units on the
cutter bar.
• Remove tool T6 after fitting of
the bearing units.
NB! Wait with the fitting of the
last bearing unit.
• Fill the cutter bar with oil
before you fit the last bearing
unit.
• For volume, see on the left.
For the cutter bar always
use SAE GL4 EP 80
Cutter bar No. of disc Ltr. (approx.) US Pints (approx.)
Imp. Pints
(approx.)
2316M
4 1.5 3.2 2.6
2320M
6 1.8 3.8 3.2
2324M
6 2.2 4.7 3.9
5.4.2 Cutter bar – repair instructions
Assembly of bearing house(s)
• Take care of the timing, for uneven amount of discs it’s different
for the first hub on LH side, see picture!
2320M
5 discs
2317M
2324M
4 or 6
discs
49