Kurtz Ersa HR 500, Translation Of The Original Operating Manual

Page: 72 / 124

6 | Function description
Editing the soldering profile in the [Profile management] tab and changing it permanently
6.8 Editing the soldering profile in the [Profile management] tab and changing
it permanently
6.8.1 Overview of the [Profile management] tabulator
In tab [Profile management], you can create, edit, copy, delete and save soldering
profiles as an administrator. If you are logged in as a standard user, this tab will not
be available. Tab [Profile management] largely corresponds to the content of tab
[Rework], where you can also make changes to the soldering profile, but they can-
not be saved. In tab [Reworksoldering processes are started and controlled. For a
description of tab [Rework], please read Chapter Temporarily editing the soldering
profile in the [Rework] tab [
} 56].
Dialog [Profile managementis divided into the following fields:
Combined
Rework Archive User administration Profile management Administration
Soldering
Desoldering
Name
Placement
Profile settings
Search
Heater config Information
Board
Component
Control sensor
Adaptor (head)
Dip mode
Placement mode
Drop height
TC1
Distance 50 mm
No automation
Placement
Nozzle
Heating head position
Placement Inspection Soldering Inspection
Desoldering
Soldering Desoldering Synchronize
Process automation
Time
Component tray
Pickup mode
Fig. 18: Fields in tab Profile management
1 Tab bar. Viewing tabs and the button bar
[Manual mode]
2 Display and buttons to open dialogs, from left to
right:
– Display of the temperature of the assigned
temperature sensor
– Display Icon green = Network connection es-
tablished, red = No network connection
– Button “User name” to change user
– Button to open dialog [System state]
Button to close the HRSoft 2 program
For this purpose, please read Chapter The top
bar in the HRSoft 2 program [
} 55].
Ersa GmbH Operating_instructions HR 500 DE 3BA00246-01 | Rev. 1 72 / 124