5 | Commissioning
Calibrate the pipette distances and the optical axle
Style
Device selection
Selected device
Rework
Archive
User administration
Profile management
Administration
HRSoft 2 options
Graph options
Device options
Firmware update
System board update file
Power board update file
Satellites update file
Device setup
Device transport position
Move to transport position
Firmware update
Start device setup
Select file
Select file
Select file
Temp. offset (120° C)
Channel TC 1
Reduce Z-axis velocity
Distance to reduce z-axis velocity
Send
Channel TC 2
Select file
Select file
Xmos update file:
Amtel update file:
Fig. 10:
Dialog [Device options]
c) Now click and perform function [Start device setupin the right column.
ð
The wizard for the pipette calibration starts. The information line above
the diagram describes the working steps to be performed. The pipette per-
forms a reference run.
Style
Rework
Archive
User administration
Profile management
Administration
HRSoft 2 options
Graph options
Device options
Zero Point Teach In
Back
Next
Tray Table Teach In
Vision Box Teach In
Ersa GmbH
Operating_instructions HR 500 DE 3BA00246-01 | Rev. 1
44 / 124
