manualshive.com logo in svg

Kurabo QuickGene-810, Operation Manual

The Kurabo QuickGene-810 Operation Manual is a comprehensive guide to help you navigate and maximize the features of this advanced product. Easily downloadable for free from our website, you can access the manual to unlock the full potential of the Kurabo QuickGene-810, empowering you with in-depth knowledge for efficient use.

Share
Download
background image

QuickGene-810 Operation Manual 

Rev. 1.7

i

1

3

2

5

4

6

7

Introduction

This manual is for researchers.
Thank you for using the Nucleic Acid Isolation System QuickGene-810 (hereafter, called "QuickGene-
810"). Easy operation of this device enables extraction of DNA and RNA from various samples including 
whole blood/tissue/cells/plants/virus and others.
This manual contains important information regarding the safe use of the QuickGene-810. Read this 
manual carefully before using. 
Keep this manual after reading, for reference whenever necessary.

■ 

Exclusion clauses

• The contents of this manual may be updated without notice.

• FUJIFILM Corporation assumes no liability for damages to third party copyrights or other 

rights arising from the use of any information in this manual.

• FUJIFILM Corporation assumes no liability for device failures or damages due to installation, 

relocation, remodeling, maintenance, and repairs performed by parties other than FUJIFILM 

Corporation or agencies specified by FUJIFILM Corporation.

• FUJIFILM Corporation assumes no liability for failures or damages of our products due to 

third-party products other than products delivered by FUJIFILM Corporation.

• FUJIFILM Corporation assumes no liability for device failures or damages due to remodeling, 

maintenance, repairs, etc. using repair parts other than genuine parts specified by FUJIFILM 

Corporation.

• FUJIFILM Corporation assumes no liability for device failures or damages due to failure to 

observe the precautions and operation procedures described in this manual.

• FUJIFILM Corporation assumes no liability for device failures or damages due to using the 

device in an environment that does not meet the operational requirements (power, installation 

environment, etc.) described in this manual.

• FUJIFILM Corporation assumes no liability for device failures or damages due to natural 

disasters such as fire, earthquakes, floods, or lightning.

• No part of the contents of this manual may be reproduced without permission from FUJIFILM 

Corporation.

■ 

Trademarks

Company names and product names are trademarks or registered trademarks of their respective owners. 

All Rights Reserved, Copyright © FUJIFILM Corporation 2005-2010

About Infectious Materials

When handling or disposing of infectious materials, follow the laboratory 
guideline or the law regarding infectious wastes to perform the incineration, 
fusion, sterilization, and/or disinfection.
When you use a third party to dispose it, outsource it to a licensed operator for 
industrial waste subject to special control, and give them the management table 
(manifest) for industrial waste subject to special control at the same time.

Universal biological

hazard symbol

KURABO INDUSTRIES LTD. assumes no liability for failures or damages of our products 

due to third party products other than products delivered by KURABO INDUSTRIES LTD..

KURABO INDUSTRIES LTD. assumes no liability for device failures or damages due to        
installation, relocation, remodeling, maintenance, and repairs performed by parties other 
than KURABO INDUSTRIES LTD. or agencies specified by KURABO INDUSTRIES LTD..

KURABO INDUSTRIES LTD.  assumes no liability for damages to third party copyrights 

or other rights arising from the use of any information in this manual.

KURABO INDUSTRIES LTD. assumes no liability for device failures or damages due to 
remodeling, maintenance, repairs, etc. using repair parts other than genuine parts specified 
by KURABO INDUSTRIES LTD..

KURABO INDUSTRIES LTD. assumes no liability for device failures or damages due to    
failure to observe the precautions and operation procedures described in this manual.

KURABO INDUSTRIES LTD. assumes no liability for device failures or damages due to 
using the device in an environment that does not meet the operational requirements (power, 
installation environment, etc.) described in this manual.

KURABO INDUSTRIES LTD. assumes no liability for device failures or damages due to 
natural disasters such as fire, earthquakes, floods, or lightning.

No part of the contents of this manual may be reproduced without permission from KURABO   
INDUSTRIES LTD.. 

Rev. 2.1

Summary of Contents for QuickGene-810















































































Reviews:

No comments

Related manuals for QuickGene-810

Labnet D1200 Instruction Manual preview
D1200
Brand: Labnet Pages: 2
National Instruments 9403 Getting Started Manual preview
9403
Brand: National Instruments Pages: 16
Jasco PRO Series Setup preview
PRO Series
Brand: Jasco Pages: 11
MacDon A30-S Assembly Instructions Manual preview
A30-S
Brand: MacDon Pages: 46
MacDon 5020 Operator'S Manual preview
5020
Brand: MacDon Pages: 82
Mac Medical PTF1000 Preparations For Using preview
PTF1000
Brand: Mac Medical Pages: 2
MACDEV CYBORG User Manual preview
CYBORG
Brand: MACDEV Pages: 8
MAC TOOLS Mentor Touch ET750 Operating Instructions Manual preview
Mentor Touch ET750
Brand: MAC TOOLS Pages: 24
MA lighting MA Switch Repair Instructions preview
MA Switch
Brand: MA lighting Pages: 10
Naked NKD1 Installation & Operating Manual preview
NKD1
Brand: Naked Pages: 36
GE PWS Operating And Maintenance Instructions Manual preview
PWS
Brand: GE Pages: 18
GE 60105LO Instructions preview
60105LO
Brand: GE Pages: 2
Kanlux TEAR N Manual preview
TEAR N
Brand: Kanlux Pages: 4
Carbatec TH-B317P Owner'S Manual preview
TH-B317P
Brand: Carbatec Pages: 29
PurAthletics BALANCE DISC Instructions preview
BALANCE DISC
Brand: PurAthletics Pages: 2
Parkside PALA 2000 A1 Operation And Safety Notes preview
PALA 2000 A1
Brand: Parkside Pages: 88
Hantek DSO8000E Series User Manual preview
DSO8000E Series
Brand: Hantek Pages: 95
Marcy MWB-20100 Owner'S Manual preview
MWB-20100
Brand: Marcy Pages: 13

Brands by name

Popular brands

Load more brands