manualshive.com logo in svg

Kurabo QuickGene-810, Operation Manual

Share
Download
Kurabo QuickGene-810 Operation Manual Download Page 9

QuickGene-810 Operation Manual 

Rev. 1.7

vii

1

3

2

5

4

6

7

Einführung

Diese Anleitung richtet sich an Wissenschaftler.
Wir danken Ihnen für den Kauf des Nukleinsäureisolierungssystems QuickGene-810 (im Folgenden als 
„QuickGene-810“ bezeichnet). Mit diesem Gerät kann durch einfache Bedienung eine DNA- und RNA-
Extraktion durchgeführt werden, unter anderem aus Vollblut-, Gewebe-, Zell-, Pflanzen-, Virus- und 
anderen Proben.
Diese Anleitung enthält wichtige Informationen zur sicheren Verwendung von QuickGene-810. Lesen Sie 
die Anleitung vor der Verwendung sorgfältig durch. 
Bewahren Sie diese Anleitung nach dem Lesen zum späteren Nachschlagen auf.

■ 

Ausschlussklauseln

• Der Inhalt dieser Anleitung kann jederzeit ohne Vorankündigung geändert werden.

• FUJIFILM Corporation übernimmt keine Haftung für die Verletzung von Copyright- oder anderen 

Rechten Dritter, die aus der Verwendung jeglicher Informationen dieser Anleitung entstehen können.

• FUJIFILM Corporation übernimmt keine Haftung für Geräte-Ausfälle oder -Beschädigungen, 

die durch Installation, Standortveränderung, Veränderungen, Wartung oder Instandsetzung 

entstehen, sofern diese nicht durch FUJIFILM Corporation oder von FUJIFILM Corporation 

genannte Auftragnehmer durchgeführt wurden.

• FUJIFILM Corporation übernimmt keine Haftung für Ausfälle und Beschädigungen unserer 

Produkte, die durch Produkte von Drittherstellern verursacht wurden, sofern diese Produkte 

nicht von FUJIFILM Corporation geliefert wurden.

• FUJIFILM Corporation übernimmt keine Haftung für Geräte-Ausfälle und -Beschädigungen, 

die durch Veränderungen, Wartung, Instandsetzung usw. unter Verwendung von Ersatzteilen 

verursacht wurden, die nicht von FUJIFILM Corporation angegebene Originalteile sind.

• FUJIFILM Corporation übernimmt keine Haftung für Geräte-Ausfälle und -Beschädigungen, 

die auf die Nichtbeachtung der in dieser Anleitung beschriebenen Vorsichtsmaßregeln und 

Betriebsverfahren zurückzuführen sind.

• FUJIFILM Corporation übernimmt keine Haftung für Geräte-Ausfälle und -Beschädigungen, die auf 

den Betrieb des Geräts unter Bedingungen zurückzuführen ist, die den in dieser Anleitung 

beschriebenen Betriebsanforderungen (Stromversorgung, Betriebsumgebung etc.) nicht entsprechen.

• FUJIFILM Corporation übernimmt keine Haftung für Geräte-Ausfälle und -Beschädigungen, 

die auf Naturkatastrophen wie Feuer, Erdbeben, Überschwemmung oder Blitzschlag 

zurückzuführen sind.

• Kein Teil dieser Anleitung darf ohne Erlaubnis der FUJIFILM Corporation reproduziert werden.

■ 

Warenzeichen

Firmen- und Produktnamen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber. 

Alle Rechte vorbehalten, Copyright © 2005-2010 FUJIFILM Corporation

Umgang mit infektiösen Stoffen

Befolgen Sie bei der Handhabung oder Entsorgung von infektiösen Abfällen die 
Laborrichtlinien sowie die geltenden Gesetze und Vorschriften, und führen Sie die 
Verbrennung, Einschmelzung, Sterilisation und/oder Desinfektion entsprechend durch.
Wenn Sie die Entsorgung durch Dritte ausführen lassen, beauftragen Sie 
zugelassene Entsorgungsfirmen für industriellen Sondermüll, und stellen Sie ihnen 
die relevanten Informationen zur Sondermüll-Abfallbehandlung zur Verfügung.

Universal biological

hazard symbol

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

KURABO INDUSTRIES

Summary of Contents for QuickGene-810















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands