Kurabo QuickGene-810, Operation Manual

Page: 39 / 78

QuickGene-810 Operation Manual
Rev. 1.7
15
2 Basic Functions
1
3
2
5
4
6
7
2
Basic Functions
This chapter explains the basic functions of the QuickGene-810.
2.1 Components
The following describes the main components of the QuickGene-810:
Component Function
Operation unit
Operate the buttons to select an extraction mode and start/stop an extraction
process.
The LCD and LEDs display the device status.
Buffer setting unit
The buffers (wash buffer, elution buffer) are set here. The buffers set are sent to
the discharge unit through the pump unit.
Pump unit
Sends the buffers (wash buffer, elution buffer) to the pressure unit according to
the extraction program.
Carrier unit
Puts pressurized air and buffers (wash buffer, elution buffer) into the cartridge
and performs the extraction process (binding - washing - elution).
Sample unit
By moving the Tube Holder, the waste liquid and extracted liquid are discharged
into the waste tube and collection tube, respectively.
Operation unit
Pump unit
Carrier unit
Sample unit
Buffer setting unit