Kubota WSM L3540-II, Workshop Manual

Page: 135 / 672

ENGINE L3540-II, L4240-II, L5040-II, L5240-II, L5740-II , WSM
1-S33
Hydraulic Pipes and Radiator Hose
1. Remove the radiator hose (1).
2. Remove the front loader pipe bracket bolts (9).
3. Remove the oil cooler pipe (2).
4. Remove the suction pipe (3).
5. Disconnect the fuel hose (6) from fuel filter.
6. Remove the power steering delivery pipe (5), delivery pipe 1 (7)
and the delivery pipe 2 (8).
7. Remove the return pipe (4).
8. Remove the recovery tank (11) and washer tank (10) with stay.
(When reassembling)
9Y1211167CLS0018US0
Propeller Shaft
1. Slide the propeller shaft cover (4) and (8) after removing the
screws (7).
2. Tap out the spring pins (2), (6) and slide the couplings (1), (5)
and then remove the propeller shaft with covers (4), (8).
(When reassembling)
• Apply grease to the splines of propeller shaft 1 (3).
9Y1211167CLS0019US0
Tightening torque
Joint bolt for delivery pipe 2
(Hydraulic pump side)
40 to 49 N·m
4.0 to 5.0 kgf·m
29 to 36 lbf·ft
Joint bolt for delivery pipe 2
(Valve side)
49 to 68 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
Joint bolt for power steering
delivery pipe
49 to 68 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
Retaining nut for delivery
pipe 1
89 to 100 N·m
9.0 to 11 kgf·m
65 to 79 lbf·ft
Retaining nut for power
steering delivery pipe
49 to 58 N·m
5.0 to 6.0 kgf·m
37 to 43 lbf·ft
Joint bolt for oil cooler pipe
89 to 98 N·m
9.0 to 10 kgf·m
65 to 72 lbf·ft
(1) Radiator Hose
(2) Oil Cooler Pipe
(3) Suction Pipe
(4) Return Pipe
(5) Power Steering Delivery Pipe
(6) Fuel Hose (7) Delivery Pipe 1
(8) Delivery Pipe 2
(9) Front Loader Pipe Bracket Bolt
(10) Washer Tank
(11) Recovery Tank
(1) Coupling
(2) Spring Pin
(3) Propeller Shaft 1
(4) Propeller Shaft Cover (5) Coupling
(6) Spring Pin
(7) Screws
(8) Propeller Shaft Cover
KiSC issued 02, 2015 A